Sunday, September 06, 2009

Good News From TelkomFlexi

From the beginning of August, 2009, one of our big CDMA provider launched an unlimited dialup internet access,  called flexiNet. We have to be happy hearing this news because in the future  budget for accessing internet will be cheaper and cheaper.

To use this FelxiNet ( telkomnet flexi ), firstly we need  registration by sending an sms like bellow :

Type REG HARIAN, then send to 2255, its charge Rp. 2.500,- / 24 hours and will be renewed every 24 hours. To stop the service or unsubscribe type STOP send to 2255.

Type REG MINGGUAN, then send to 2255, its charge Rp. 15.000,- / 168 hours ( a week ) and will be renewed every seven days (a week) hours. To stop the service or unsubscribe type STOP send to 2255.

Type REG BULANAN, then send to 2255, its charge Rp. 60.000,- / 720 hours ( a month ) and will be renewed every month. To stop the service or unsubscribe type STOP send to 2255.

After sending the sms then the server provider will replay you with three smses from 2255. Its give your detail registrations like username and password, For example User Nmae : user@flexi, Password : telkom, dialup number : #777. You have to enter that account to your dialup setting. Then connect!!!! And brows the internet UNLIMITEDLY. GOODLUCK!!!!!!!!!!!!!!
Read More »

Saturday, September 05, 2009

How To Unlock Bios Administrator Password Protection

Maybe we experienced a problem when we want to reinstall a cpu. We need to set bot order from the CD-Drive, but when we want to enter bios set up the CPU ask for a password. How to unlock this i f we dont know anything about the password. Try this steps :
  1. Open the case
  2. Look for the bios jumper ( commonly its located near the bioses battery )
  3. Set jumper to clear and then turn it on
  4. done!!!!!!!!
Note : If the above steps doesn't work try this one :
  1. Plug off the battery then turn the cpu on
  2. Shut down cpu, and put the battery back to its places
  3. Done!!!!
Read More »

Friday, September 04, 2009

Freeware Download Index

Read More »

Sound Driver Download



Read More »

Printer Drivers Download

Read More »

Display Driver Download

Our site doest not host any files, the driver we provided below is free licence by its manufacturer. What we provide here is just a link to their Respective owner site. We are happy to help you!!!

ATI
NVIDIA
INTEL
SIS


Read More »

Dialup Connection with handphones Modem

At first ive got a litle confuse using my handphone as a dialup modem. You know why? I have set it just like the operator said, and its work but there is an error 734 : PPP Link Control Protocol Was Terminated. I nearly gave up coz of that error. I start to brows the inter looking for solution. And finally i have to say a very great thanks to Google which provide me with unlimited information. So what is it?

To solve the 734 error you must set extra parameter for your handphone. Enter control paanel => phone and modem option => modem => option => advance => enter the extra setting in the extra initialization command => ok. As a sample

Here parameters to set you handphone as a dialup modem for pc ( For Indonesian cell Card ) :

1. Telkomsel Flash – Halo/Simpati/As (Waktu)
Dial Up Number : *99***1#
User Name :
Password :
Access Point : FLASH
Extra Setting : at+cgdcont=1,”IP”,”flash”


2. Telkomsel GPRS – Halo/Simpati/As (Data)
Dial Up Number : *99***1#
User Name : wap
Password : wap123
Access Point : TELKOMSEL
Extra Setting : at+cgdcont=1,”IP”,”internet”


3. Indosat – Matrix – (Data)
Dial Up Number : *99***1#
User Name :
Password :
Access Point : www.satelindogprs.com
Extra Setting : at+cgdcont=1,”IP”,” www.satelindogprs.com”



4. Indosat – Mentari – (Data)
Dial Up Number : *99***1#
User Name : indosat
Password : indosat
Access Point : www.satelindogprs.com
Extra Setting : at+cgdcont=1,”IP”,” www.satelindogprs.com”


5. Indosat – IM3 – (Data)
Dial Up Number : *99***1#
User Name : gprs
Password : im3
Access Point : www.indosat-m3.net
Extra Setting : at+cgdcont=1,”IP”,” www.indosat-m3.net”


6. Indosat – IM3 – (Waktu)
Dial Up Number : *99***1#
User Name : indosat@durasi
Password : indosat@durasi
Access Point : www.indosat-m3.net
Extra Setting : at+cgdcont=1,”IP”,” www.indosat-m3.net”


7. XL – Xplor/Bebas/Jempol (Data)
Dial Up Number : *99***1#
User Name : xlgprs
Password : proxl
Access Point : www.xlgprs.net
Extra Setting : at+cgdcont=1,”IP”,” www.xlgprs.net”


8. Telkom Flexi – Classy/Trendy (Data)
Dial Up Number : #777
User Name : telkomnet@flexi
Password : telkom
Access Point :
Extra Setting : at+crm=1


9. Telkom Flexi – Classy/Trendy (Waktu)
Dial Up Number : 080989999
User Name : telkomnet@instan
Password : telkom
Access Point :
Extra Setting : at+crm=0


10. Mobile 8 – Fren
Dial Up Number : #777
User Name : m8
Password : m8
Access Point :
Extra Setting :


11. Starone
Dial Up Number : #777
User Name : starone
Password : indosat
Access Point :
Extra Setting :


12. Esia (Waktu)
Dial Up Number : #777
User Name : esia
Password : esia
Access Point :
Extra Setting :

Good Luck !!!!
Read More »

Article Index

Read More »

Wednesday, July 08, 2009

My Computer Always Ask For F1 Key When I Turn It On

Well, i write this article to reply someones question about his computer a momment ago. He ask me, "Why my computer always ask for F1 key when i turn it on?"

It happens because of the Bios is not configured correctly. What is BIOS?

(BIOS) Acronym for basic input/output system, the built-in software that determines what a computer can do without accessing programs from a disk. On PCs, the BIOS contains all the code required to control the keyboard, display screen, disk drives, serial communications, and a number of miscellaneous functions.

The BIOS is typically placed in a ROOM chips that comes with the computer (it is often called a ROM BIOS). This ensures that the BIOS will always be available and will not be damaged by disk failures. It also makes it possible for a computer to boot itself. Because RAM is faster than ROM, though, many computer manufacturers design systems so that the BIOS is copied from ROM to RAM each time the computer is booted. This is known as shadowing.

Many modern PCs have a flash BIOS, which means that the BIOS has been recorded on a flash memory chip, which can be updated if necessary.

The PC BIOS is fairly standardized, so all PCs are similar at this level (although there are different BIOS versions). Additional DOS functions are usually added through software modules. This means you can upgrade to a newer version of DOS without changing the BIOS.

PC BIOSes that can handle Plug-and-Play (PnP) devices are known as PnP BIOSes, or PnP-aware BIOSes. These BIOSes are always implemented with flash memory rather than ROM. Definition source : webopedia.com

Why is this happen and how to resolve this problem? There is many possible answer :

  • Maybe your bios reseted accidentally : It possible to happen when the computer idle for a long of time without pluged in into the power chord. In case of this, just go to the bios set up when the computers boot by pressing the DELL button (some mainboard use the different button like F10, look at the mainboard reference) then set your bios setting to the normal state like time and date, etc. Save your setting then reset the computer.
  • The bioses battery is out of use : It always happen on the old computer. Just replace the battery. Boot your computer then go the bios set up, set your bios to the normal state and save your setting. Finally boot your computer normally.
  • The bios jumper is not configured correctly : Open your case to take a look at the bios jumper. Make sure there is a jumper on the bioses jumper pin and set to the correct pin.
  • If the above steps doesn't resolve your problem, let's back to the bioses battery. Open your battery, you will see the battery conductor such as a pin bellow the battery, pull it up softly -softly- or you will break it then clean it up with the liquid cleaner. Put the battery back neatly then boot your computer. Go to the bioses set up and set the bios configuration to the normal state. Save your setting then reset the computer.
  • If the problem remains, may your IC has broken. In case of this, go to the experts or simply replace your motherboard.
Ok, i hope this article solve your problem. Good luck!!!
Read More »

Tuesday, July 07, 2009

Change Windows XP Serial Number

Steps to change the volume licensing product key

Hy guys, in this post id like to share a litle article i found on microsoft.com. I found it usefull for me.
This article describes methods for how to change the Windows XP product key after a Volume Licensing installation to resolve the issue. One method uses the Windows Activation Wizard graphical user interface (GUI) and the other method uses a Windows Management Instrumentation (WMI) script. The Activation Wizard method is easier. However, if you must change the product key for multiple computers, the script method is more suitable.
Method 1: Use the Activation Wizard

Important!!! This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.


Note : We recommend that you run System Restore to create a new restore point before you follow these steps.

Deactivate Windows
1. Click Start, and then click Run.
2. In the Open box, type regedit, and then click OK.
3. In the navigation pane, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Current Version\WPAEvents
4. In the topic pane, right-click OOBETimer, and then click Modify.
5. Change at least one digit of this value to deactivate Windows.

Reactivate Windows and add new product key
1. Click Start, and then click Run.
2. In the Open box, type the following command, and then click OK.
%systemroot%\system32\oobe\msoobe.exe /a
3. Click Yes, I want to telephone a customer service representative to activate Windows, and then click Next.
4. Click Change Product key.
5. Type the new product key in the New key boxes, and then click Update.
If you are returned to the previous window, click Remind me later, and then restart the computer.

6. Repeat steps 1 and 2 to verify that Windows is activated. You receive the following message:
Windows is already activated. Click OK to exit.
7. Click OK.
8. Install Windows XP Service Pack 1a or a later version of Windows XP.
If you cannot restart Windows after you install Windows XP SP1 or a later version of Windows XP, try the following steps:
1. Restart your computer and start pressing F8 until you see the Windows Advanced Options menu.
2. Select Last Known Good Configuration from the menu and press ENTER. This option starts Windows by using a previous good configuration.
3. Repeat steps 1 through 8 under "Reactivate Windows and add new product key."
If you can install SP1 or a later version of Windows XP and you can restart Windows, you have resolved the issue. If the issue has not been resolved, try method 2 or see the "Next Steps" section for more troubleshooting resources.

If you like to learn more about this article, please visit microsoft.com
Read More »

Saturday, June 06, 2009

Textual description of firstImageUrl

Partner

Read More »